Eagle Extrusion Private Limited

Eagle Extrusion Private Limited

Begampura, Surat, Gujarat
GST No. 24AACCE0427G1Z7
TrustSEAL Verified
Call 0804763822755% Response Rate
SEND EMAIL
 

About Us

Hotlog Shear

“Offering excellent surface for finishing operations such as anodizing, powder coating, electro-coloring, etc.


Eagle Extrusion Pvt. Ltd. has the Multi Billet Hot Log Shear Furnace is suitable to homogenize billets in various alloys with a temperature control of ± 5°C, a pre-requisite for good homogenizing. Homogenizing of the billets ensures uniform mechanical properties – hardness, UTS, Yield Strength, percentage Elongation etc. besides offering excellent surface for finishing operations such as anodizing, powder coating, electro-colouring, etc. And it cut the billet efficiantly without generating any chips.
For more Information:Contact Us
Hotlog Shear

Die Oven

“Offering fastest heating of die and output material is smooth”

Die Oven is the equipment of being applied with Extrusion Press to mould the temperature near the billets and conveniently to extrusion molding.
For more Information:Contact Us
Die Oven

Extrusion Press

“Obtain tight dimensional tolerances with no additional machining operations required, reducing total part cost”

With the 5 Extrusion Press lines – 450 MT, 950 MT, 1000 MT, 1200 MT & 1800 MT (indigenous) – all PLC controlled, the Company is able to cater to the requirements ranging from miniature profiles up to large-sized Profiles in Soft, Medium and High Strength Alloys. The arrangement for taper heating of billets ensures ‘ near-isothermal ' extrusions for achieving uniform property along the length of the extruded profiles / sections / bars.
For more Information:Contact Us
Extrusion Press

Handling System

Automated, integrated system keeps throughput high and profiles damage-free”

Eagle Extrusion Pvt. Ltd. has been installed profile handling equipment's high degree of automation, our handling equipment helps us to maximize throughput while minimizing manual handling.


The belt system used for handling the aluminium extrusions keeps the soft metal scratch-free and shiny.

For more Information:Contact Us
Handling System

Aging Oven

“Offering excellent surface for finishing operations such as anodizing, powder coating, electro-coloring, etc. “


Eagle Extrusion Pvt. Ltd. has the gas fired Aging Oven that deliver rapid heatup and provide exceptional temperature uniformity for aging of aluminum products. So, it ensures uniform mechanical properties – hardness, UTS, Yield Strength, percentage Elongation etc. besides offering excellent surface for finishing operations such as anodizing, powder coating, electro-colouring, etc.
For more Information:Contact Us
Aging Oven

Furnace

“Gas fired, fixed-hearth, reverberatory Melting-cum-Holding Furnaces of bath capacities 3 MT, 6 MT and 14 MT”

The Company has 3 (three) Gas fired, fixed-hearth, reverberatory Melting-cum-Holding Furnaces of bath capacities 3 MT, 6 MT and 14 MT.


Molten metal treatment is carried out by an Automatic Flux Feeder in conjunction with “eco-friendly” nitrogen degassing. The presence of hydrogen gas in the molten metal is detected using a Gas detector. Further degassing is carried out, if required, prior to casting.

Composition is determined using Direct Reading Vacuum Emission Spectrometer.


For more Information:Contact Us
Furnace

Casting System

"Providing intricate and sophisticated aluminium sections"

The DC Casting unit is flexible to cast 4”, 5” & 7” dia billets in alloys ranging from 1xxx to 7xxx series.
For more Information:Contact Us
Casting System
X
zoomup




Reach Us
Bharat Sojitra (Managing Director)
Eagle Extrusion Private Limited
Plot No. A-1 To A-8, C-1, Block No. 200, Village Karanj
Begampura, Surat - 394110, Gujarat, India


Call Us


Send E-mail